Reference 7
Contents
Calling the Toolbox
Toolbox calls are calls you make to the Macintosh Operating System. Sometimes a distinction is made between 'Toolbox calls' and 'System calls', but this distinction isn't really relevant to us here, so I will use the term 'Toolbox calls' to refer to all calls to the Mac OS.
Mops 2.7 on, you should use the word SYSCALL to set up your Toolbox calls, as we described in the Tutorial. In fact, in PowerMops, you must use this syntax, since the old syntax (call xxxx) isn't supported any more, as indeed it couldn't be on the PowerPC. Here's an example of a word to set the cursor:
syscall GetCursor \ Note: these are CASE-SENSITIVE!
syscall SetCursor
: set_my_curs { curs# -- }
curs# \ push cursor #
GetCursor \ Returns handle to cursor
@ \ needs to be a pointer for SetCursor
SetCursor
;
Note the following points:
- You have to 'pre-declare' any Toolbox call you're going to use, outside any definition, and before any definition in which you do the call. It doesn't matter if you use
SYSCALLseveral times over for the one call”in different source files, say — subsequent ones will be ignored. - The name of the Toolbox call (following
SYSCALL) is case-sensitive, unlike everything else in Mops! This was unavoidable, because of the way Toolbox calls are handled on the PowerPC. So for example, if we had putsyscall getcursor
above, we would have copped a compile-time error message telling us that Mops couldn't find the name. - The returned result from a function is simply pushed on to the stack — in earlier versions of Mops you had to push a zero there at the beginning to make room, but this is now not needed.
- Likewise, the words
makeint,I->L,Word0,packandunpackare no longer necessary for Toolbox calls although, as we shall see later, they may be necessary for callback routines, routines that are called from the Toolbox. You may not have to worry about these.Makeintetc. are used for manipulating 16-bit quantities on the stack. WithSYSCALL, you simply push the parameters onto the stack in order, and don't worry about whether they are 16 or 32 bit. Mops reads information bytes stored with theSYSCALLdeclaration in the dictionary, figures things out and adjusts the stack before executing the calling sequence. (On the PowerPC, the lengths will be different — generally a fixed size of 32 bits, and they're passed in registers, not the stack,. so we really had to do something about this.)
SYSCALL and the Universal Headers
As many of you no doubt know, for the last few years Apple has been releasing updates to its API in the form of 'Universal Headers' (for C) and 'Universal Interfaces' (for Pascal). (API stands for “Application Program Interface”, and covers all Toolbox calls, the data structures which participate in those calls, and system-defined constants.)
In Mops, we have always provided a way of accessing the Apple API via the Tools module, which provided the words CALL, KONST and GLOBAL. The Tools module gets its API information from some files which I obtained around 1991, so are quite a bit out of date now.
In 1992 I collaborated with Xan Gregg who was developing Power MacForth for Creative Solutions, and I wrote a program to parse the Universal Headers and produce output files which would be suitable for reading by both MacForth and Mops. SYSCALL is implemented by a new module, CallsMod, which when it is compiled reads in a file called 'xcalls' which my program generates (this file should be in the Module Source folder). All the API information we need is read out of this file and built into the dictionary of CallsMod when it compiles.
This means that we are now up to date with the latest Apple information, and it will be easy to keep up to date in future.
CallsMod also implements KONST, which functions exactly as it did before. But CallsMod does not implement GLOBAL. This word is still available as it was, via the old Tools module, but it now definitely isn't a good idea to refer directly to low memory globals. The Universal Headers (and therefore SYSCALL) provide accessor functions to do what you used to do by directly accessing the globals. But most importantly, in future systems such as Rhapsody, the globals will not be there any more!
I know there are still a number of places in the Mops system where I access globals directly, but I'll be trying to get rid of these progressively.
Note: Rhapsody has been realized as Mac OS X. Now that PowerMops runs with Mac OS X, the task described above has been completed.
Time and Space
The Universal Headers are large, so the xcalls file turns out to be 1.4 megabytes long. We achieve some savings by encoding the information stored in the dictionary in CallsMod, but CallsMod.bin still weighs in at over 700K. This means that there must be this much heap space available when you use SYSCALL in Mops. I have therefore increased the default and minimum partition sizes for Mops to 2500K. If you reduce it much below this, you won't be able to use SYSCALL.
But note, this increased memory footprint won't apply to installed applications, since these won't contain CallsMod (unless you need it because you do compiling at run time in installed apps”in this unusual situation, you will need the memory space).
CallsMod also takes quite a while to compile, if you have a slower Mac, take a long coffee break. CallsMod will be compiled when you compile up the Mops system for the first time, so this will be an even longer process than it was before. Sorry, but normally you'll only have to do it once per new Mops release. Such is the price of progress.
You may conclude that once you've compiled up Mops, you can trash the xcalls file. This is right, but probably not a good idea in case you need to recompile the Mops system at a later date for any reason (such as to incorporate bug fixes).
(Bugs? What bugs?)
Toolbox Data Types
For all Toolbox data types which are 32 bits long or less, you just push the value onto the stack before doing the call. Thus you do this for the common types Integer, Boolean, Char, Longint, and Pointer. Other data types are either stored in a 32-bit cell, or you pass a 32-bit pointer to a longer data structure. Any composite structure longer than 32 bits (e.g. a Rect) uses a pointer when passing it as a parameter.
When a Toolbox routine specifies a VAR parameter, this is a call by address, and must use a pointer to the actual data structure, even if it is an Integer or a Long. This is because the Toolbox will actually change the value of the parameter, and needs its location to do so.
Procedure and Function Calls
Toolbox routines have been, for historical reasons, defined in terms of the Pascal language. More recently, Apple have been defining the routines in terms of C, so you may encounter examples of either. They can be either Procedures or Functions, depending on how the Toolbox responds to their calls. In C terminology, we would say that they either return a result or don't. If they return a result, they return only one”Mops will let you write a definition that returns several results, but Pascal and C don't, and so the Toolbox doesn't do this either.
Here are examples of typical Procedure and Function calls, first with the (Pascal and C) definitions as in Inside Macintosh, then with the equivalent Mops code:
Pascal:
PROCEDURE InvertRndRect (r: Rect; ovalWidth, ovalHeight: INTEGER);
C:
pascal void InvertRoundRect (const Rect *r, short ovalWidth, short ovalHeight);
Mops:
syscall InvertRoundRect
rect myRect \ declare a rectangle object
: InvertMyRect { rWidth rHeight -- }
addr: myRect \ get a pointer to the rectangle
rWidth rHeight \ push width and height
InvertRoundRect \ call the Toolbox routine
;
Pascal:
FUNCTION GetNewWindow (windowID: INTEGER; wStorage: Ptr;
behind: WindowPtr) : WindowPtr;
C:
pascal WindowPtr GetNewWindow (short windowID, void *wStorage, WindowPtr behind);
Mops:
syscall GetNewWindow
[let's say we're in a method in the Window class here]
get: resID \ get this window's resource ID (ivar) ^base \ addr of this window object window i.e. wStorage -1 \ in front of all other windows i.e. behind window -1 GetNewWindow \ call the Toolbox routine put: windowPtr \ save the returned window ptr (ivar)
Accessing System Constants
You may sometimes need to access system constants which Apple defines by name. You do it thus:
konst < name>
and the value corresponding to < name> will be pushed at run time.
Callback Routines
œCallback routines are definitions you write which you don't call from your Mops code, but which get ˜called back' by the Toolbox, for example a routine that gets called repeatedly while the mouse button is held down inside a scroll bar, or a routine that provides the functionality of a user-defined item in a dialog.
Mops defines the most common callback routines for you, which implement the normal behavior. However you might occasionally need to do something special with a callback, so we provide a way to write your own. This isn't quite as easy as normal Mops programming, but hopefully if you've got as far as writing callbacks you'll be able to handle the slightly increased complexity. A future Mops version may make this simpler, but this doesn't have a very high priority, and so probably won't happen very soon.
Here's an example of a callback routine, taken from the class Control.
PPC?
[IF] \ callbacks have to be different on the PPC!
konst uppControlActionProcInfo
:ppc_proc CtlProc { ^ctl part# -- }
\ on PPC, callback parms must be named
part# ctlExec
;ppc_proc
[ELSE]
:proc CtlPROC \ ( ^ctl int:part# -- )
word0 nip ctlExec ;proc
[THEN]
Note firstly, that callbacks are a bit different on the 68k and on the PowerPC, so we have to use some conditional compilation to handle the differences. A short preliminary word of explanation will make it clearer why this needs to happen. The Mac OS on the PowerPC has to be able to tell if a callback is in native PowerPC code or 68k code which needs to be emulated. So, whereas on the 68k you just pass the address of a callback routine to a Toolbox call which uses that callback, this can't be done on the PowerPC since the system then wouldn't have any way of telling what kind of code is used by the callback.
So, on the PowerPC, instead of passing the address of the callback itself, you pass the address of an information block. The information in this block tells the system where the callback is, as well as what sort of code it consists of. The address of such an information block is called a ˜Universal ProcPtr', or UPP for short.
In Mops, we handle the setting up of these information blocks for you. The word which introduces a callback is ˜:ppc_proc', and you terminate the definition with ˜;ppc_proc'. :ppc_proc expects a number on the stack. This number is a special system constant which is defined for that particular callback, and tells the system about the parameters it must pass to the callback. You will need to consult Inside Macintosh for the name of the appropriate constant for your callback. Its name should always have the form œupp< something> Info. When Mops encounters ˜:ppc_proc' in your code, it creates an information block for that callback, and puts the constant value in the appropriate place in that block, where the system expects it.
When you tick a :ppc_proc, Mops assumes that you're going to pass a UPP to the Toolbox, and it automatically gives you the UPP (the address of the information block).
One more thing to note is that you must declare the parameters for your callback as named parameters. This tells Mops which PowerPC registers will contain the parameters, when your routine is called.
Now for callbacks on the 68k. The word which introduces a callback is ˜:proc', and you terminate the definition with ˜;proc'. In complete contrast to the PPC version, you must not use named parameters or local variables in a :PROC word. If you want them, the safest thing to do is to have the :PROC word directly call an ordinary Mops word. The parameters passed by the system to your routine will be on the stack. However, the shorter data types (16 bits or less) will occupy only 16 bits. So you will need to use the words that Mops supplies for manipulating half-size stack cells (word0, pack, unpack, makeint, i->l, tbool). These are almost obsolete, since our SYSCALL-based way of calling the Toolbox means you don't have to use them any more when you call the Toolbox. However, this is the one place where you might still have to use them. As we said above, we might address this inconsistency in a future Mops release, but it doesn't have a high priority at present.
Example: if you have a user-defined object in a dialog, the Toolbox will call the routine you provide with a pointer the the dialog (32-bit) and the number of the item (16-bit) on the stack. Your :PROC might look like this:
:proc mydrawitemproc ( dlgptr w:item -- )
i->l \ convert 16-bit to 32-bit
MyDrawItemWord
;proc
: MyDrawitemWord { dlgptr item -- }
\ the value 'item' is now a 32-bit value and can
\ be taken off the stack normally by Mops
(Do your stuff here)
;
If the callback requires you to return a result to the Toolbox, typically a boolean, you must adjust the Mops True or False on the stack (32-bit) to be 16 bit. You also need to convert from a Mops True (-1) to a Toolbox True (1), if necessary. You can do this with the word TBOOL, as in TRUE Tbool. As this messes up the stack as far as Mops is concerned, you do it right at the end of your :proc.
| Reference 6 | Reference | Reference 8 |
| Documentation | ||
