Reference 13
Contents
Utility Modules
The Mops system contains several modules providing general functions that you might want to use in your application. You can do this either by referencing the imported names from the compiled modules as they are distributed in the Mops Folder, or by altering the source in the Modules folder and recompiling it to tailor the modules for your own use. Modules are advantageous in that they take up very little room in the resident dictionary, and load themselves only when needed on the application heap.
The Alert Box
This module gives you a predefined alert box without having to define any resources. Use Alert"
within a word or method to produce an informatory message. Example:
readLine: myFcb 2 alert" A read error has occurred"
If the readLine is successful no alert will appear, but if readLine returns a nonzero result, an alert box with the given message will be displayed along with the specific error number. You may use Alert" in place of Abort" in your final application to comply with the ‘Mac Standard’. Although customized alert boxes are better, this gives you a “quick and dirty” means of producing an alert box.
To use Alert"
, you must first include the source file AlertQ in your application. You may use NEED AlertQ
to accomplish this.
You may modify the sizes and positions of any of the items, by using ResEdit to modify the resources ALRT 900 and DITL 900 in your application. These resources come initially from Mops.rsrc, and are copied into installed applications by Install, if the file AlertQ has been included.
The Decompiler and Debugger
These are only implemented for 68k Mops, and will probably never be implemented for PowerMops. They're integrated into a single module, DebugMod, since the job of displaying compiled code is very similar whether you're decompiling or debugging. To decompile a word, type
see aWord
or to debug a word, type
debug aWord
then keep typing spaces to step through each instruction. Of course, if you're debugging, nothing will happen until aWord gets executed.
The display gives a kind of pseudoassembler, since we're compiling native code. But if you've loaded the source file through the usual load mechanism, the source will appear in a window at the top of the screen. If you loaded with logging on (turn it on with +LOG and off with -LOG) then a ‘log file’ will have been generated, which will allow the Decompiler/Debugger to find the right place in the source corresponding to whatever compiled code you're looking at. The source window will be scrolled to the right place and an underscore will appear more or less under the right source text. This will move along as you step through the compiled code.
If you're running under System 7 and also have QuickEdit running, then instead of Mops producing its own (rather primitive) source code display, an Apple event will be sent to QuickEdit asking it to open the source file. If you type <return> instead of space, then if you are looking at a call to another word (JSR or BSR), you will go down into that definition. If you type U, you will come back up again. Q will quit decompiling/debugging.
If you are debugging, G does a ‘go’ (return to normal execution) and N is like G except that you will drop into the Debugger again the Next time you execute the word you wanted to debug. Typing R gives you a dump of the machine registers. Typing F (for Forth) gets you to the Forth/Mops interpreter so you can inspect values etc. Typing Resume gets you back into the debugger with everything as you left it.
Typing the arrow keys forces scrolling of the source text window. Keypad-7 goes to the top of the source, keypad-1 goes to the end, keypad-3 goes forward to the next colon, and keypad-9 goes back to the previous colon. (These keys are used by Microsoft Word to mean Home, End, Page down and Page up, respectively, which is why I chose them.)
To decompile/debug in a module, type e.g.
in aMod see aWord
To decompile/debug a method, type:
[in aMod] see aMeth: aClass
The debugger works fine on both my Mac Plus and IIsi, and even under System 7. Since I change two interrupt vectors (T-bit and TRAP #0), it may not always work on all Macs or systems. It may, and hopefully it will, but I may not get a chance to try it out. I will be very surprised indeed if it works on PowerPC Macs.
Be careful if you are using Macsbug — the debugger replaces the vectors when it terminates normally, but if the program crashes or something, the vectors may be left changed, and Macsbug won't then work properly. Rebooting is the only way out.
If you're running under System 7 and have QuickEdit running as well as Mops, then as we mentioned above, Debug and See will send QuickEdit an Apple event asking it to open the source file. You can use this feature directly, by typing
edit someFile
Then assuming that someFile can be found via the normal Mops file lookup, the Apple event is sent to QuickEdit so that it will open the file. If the file can't be found, or QuickEdit isn't running, you'll get an error message. This works also on PPC/OS X.
The Profiler
Again this is only implemented for 68k Mops. The purpose of a profiler is to give statistics on time spent in various lines of code, and also the number of times they have been executed. Because of the hierarchical nature of the language, it seemed to make the most sense to base profiling on a given word, whose definition is profiled. This way bottlenecks can be tracked down interactively, and you can zero in on the places of interest, rather than have to wade through a mountain of useless information. Anyway, it was easier to implement this way.
To use this feature, the file containing the definition to be profiled must be loaded with logging on, since the profiler needs to know the correspondence between the source and compiled code, and this is recorded in the log file. Once this is done, just type
profile aWord
then after aWord has been run, more than once if need be, type
showP
and the source code of the definition of aWord will appear on the screen, with the statistics on the left side of each line. Turn printing on first for a hard copy.
Profile and showP are in DebugMod. Profiling works by putting a breakpoint on the first instruction corresponding to each source line. There is thus a few instructions' overhead on each line, which will slightly skew the timing results for lines such as aValue IF which only contain one instruction anyway. We try to minimize this effect by not counting time while the profiling code itself is running, but the breakpoint trap and the return instruction (RTE) do take a number of cycles. Use your common sense. Also, for processor independence, we use Mac ticks (1/60 secs) to count time. Therefore the word being profiled ought to accumulate at least several seconds' execution time, for the results to be very meaningful. Call it repeatedly in a loop, if necessary. The longer the execution time, the more accurate the results. If you get a lot of lines apparently taking zero time, this probably means you need to run the word more times. (But remember, lines consisting of just THEN, say, don't actually compile any code. So of course they won't take any time.)
If you're only interested in the execution counts, you don't need to bother about the length of the run. These counts ought to be right, no matter what.
Finally, this is a new feature, and it hasn't been very extensively tested, so please exercise caution (i.e. don't blame me if you crash without saving).
Runtime Initialization
We have a feature to make it easy to do special-purpose runtime initialization. Some files such as LongMath need an initialization call on startup (in the case of LongMath, this is to check if the processor we're running on has 32-bit multiply and divide instructions). Using several such packages together could cause problems, as each could have redirected ObjInit
without being aware of the others. And yet we want to be able to have standard packages such as LongMath which don't have to be aware of what other packages may or may not be present. To avoid this problem, we have an x-array of words to execute on startup, called INIT_ACTIONS
, and these are all executed right after ObjInit
is called. This way, ObjInit
can be restricted to just initializing the standard Mops objects, and any extra initialization can be done by adding a cfa (xt) to init_actions
. If you write a package that needs special startup action, make the startup action into a word, let's call it MyStartupWord
, then at the end of your code put
' MyStartupWord add: init_actions
and that's it. If you do a Forget
or RL
(reload) there's no problem, since the Mops loading code starts by purging init_actions
of any xts above the current top of the dictionary. This prevents init_actions
from getting invalid xts in it.
Reference 12 | Reference | Reference 14 |
Documentation |